C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM - Manual (Page 9)

8
The name of each part and the function are explained below:
T RANSMITTER
F RONT
LED (Front) Definition
POWER Off: Powered off or being on boot process.
On: Powered on (normal status)
STATUS Blink: Blinks for each codec of 1 video frame.
ON: Factory default configuration using push buttons is complete.
WIRELESS OFF: Wireless communication is disabled.
Blink: Wireless communication is not established. (Detecting AP or other nodes, or unable to
connect due to the mismatch of wireless settings).
ON: Wireless communication is established.
ETHER OFF: Not connected to wired LAN (Not linked)
ON: Connected to wired LAN (Being linked)
Push button Action
MENU (In the LCD) Goes into status menu from the initial screen.
(In the LCD) Returns to the initial screen from status/configuration top. (In
the LCD) Move up to a higher level at status/configuration menu.
Starts a factory default configuration when this button and [SET] button are pushed
together while turning on this product.
- (In the LCD) Goes back to the previous option at status/configuration menu.
(In the LCD) Changes the value at configuration menu.
+ (In the LCD) Goes on to the next option at status/configuration menu.
(In the LCD) Changes the value at configuration menu.
SET (In the LCD) Shows the status items and options at status/configuration menu.
(In the LCD) Determines the value at configuration menu.
Starts a factory default configuration when this
button and [MENU] button are pushed together
while turning on this product.
2.2 P
ARTS AND
F
UNCTION