Upgrading the system memory, Independent mode – Acer AR360 F1 User Manual
Page 67
51
Upgrading the system memory
System memory interface
The system has eighteen DIMM slots. Each CPU controls nine slots. The
DIMM slots support DDR3-1333 registered/unbuffered ECC memory
modules. For single rank and dual rank RDIMM, a maximum 3 DIMMs
per channel and a total 18 DIMMs can be supported. For UDIMMs and
quad rank RDIMMs, only 2 DIMMs per channel are supported and
maximum total 12 DIMMs.
•
Each CPU has three memory channels (channel 1, 2 and 3).
•
Each channel has 3 slots.
To maximize the memory performance, the DIMM modules should be
installed as balanced as possible among processors and memory
channels. And slots with the same slot number across memory channels
should be populated with identical DIMM.
Independent Mode
Independent mode single processor configuration:
Notes: 1. Place DIMMs in “X” location.
2. DIMM population must correspond to the above tables.
Channel 1
DIMM slots
Channel 2
DIMM slots
Channel 3
DIMM slots
Notes
Configuration
1C
1B
1A
2C
2B
2A
3C
3B
3A
A
X
B
X
X
C
X
X
X
D
X
X
X
X
E
X
X
X
X
X
X
F
X
X
X
X
X
X
X
X
X
SR, DR RDIMMS
ONLY