Xylem H-5223 - Manual (Page 100)

Example: -> GOESRRRATE? 5 Command sent to the XL™.
GOES RR Rate = 00:00:30 rs Response sent to the host system.
Command: GOESRRRATE=hh:mm:ss
Description: Set the transmission rate for the random report mode of the GOES radio.
Parameters: The new rate is to be entered in the format of HH:MM:SS, where H is hours, M is
minutes, and S is seconds.
Response: None.
Example: -> GOESRRRATE=00:01:00 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESRRTRIGGERMODE?
Description: Read the current mode of random report operation of the GOES radio. This value,
along with trigger source, determines what conditions are checked when evaluating
whether or not to generate a GOES random report.
Parameters: None.
Response: An ASCII text string is returned. The response will be “Always ”, “> Set Pt”, “<
Set Pt”, or “Delta “. (See GOES section for details)
Example: -> GOESRRTRIGGERMODE? 5 Command sent to XL™.
GOES RR Trigger Mode = Always rs Response from XL™.
Command: GOESRRTRIGGERMODE=XXXXXX
Description: Set the current mode of GOES radio random report operation.
Parameters: The flag can be set to “Always ”, “> Set Pt”, “< Set Pt”, or “Delta “.
Response: None.
Example: -> GOESRRTRIGGERMODE=> Set Pt 5 Command sent to
XL™.
rs Response from XL™.
H-5223
Remote Operation (Command Mode) C-41