Xylem H-5223 - Manual (Page 91)

Command: LOGCOLUMNnDIGITS?
Description: Read the number of digits to be displayed after the decimal point.
Parameters: ‘n’ can range from 1-25.
Response: The response is an ASCII text string with the number of digits for the n th column.
Example: -> LOGCOLUMN2DIGITS?
5 Command sent to the XL™.
Log Column 2 Digits = 1
rs Response from the XL™.
Command: LOGCOLUMNnDIGITS=XX
Description: Set the number of digits to which the corresponding value is to be expressed when it
is logged to the flash card.
Parameters: ‘n’ ranges from 1-25.
Response: None.
Example: -> LOGCOLUMN1DIGITS=2 5 Command sent to the XL™.
rs Response from the XL™.
C.11 GOES Commands
Command: GOESMODE?
Description: Read the current mode of operation of the GOES radio.
Parameters: None.
Response: An ASCII text string is returned. The response will be “None ”, “Timed ”,
“Random”, or “Both “.
Example: -> GOESMODE? 5 Command sent to the XL™.
GOES Mode = Timed rs Response sent to the host system.
Command: GOESMODE=XXXXXX
Description: Set the current mode of GOES radio operation.
C-32 Remote Operation (Command Mode)
H-5223