Xylem H-5223 - Manual (Page 90)

Example: -> LOGCOLUMN2SOURCE? 5 Command sent to the XL™.
Log Column 2 Source = Date rs Response from the XL™.
Command: LOGCOLUMNnSOURCE=XXXXXX
Description: Set the source of the n th data column going to the card.
Parameters: ‘n’ ranges from 1-25. The XL™ expects the new source of the data column
corresponding to ‘n’ (e.g. Stage, PSI, Temp).
Response: None.
Example: -> LOGCOLUMN1SOURCE=Time 5 Command sent to the XL™.
rs Response from the XL™.
Command: LOGCOLUMNnHEADER?
Description: Read the column header of the n th column of data to be sent to the flash card. This
value will be placed at the top of each column in the file logged to the card.
Parameters: ‘n’ can range from 1-25, indicating the corresponding column.
Response: The response will be an 8 character ASCII text string.
Example: -> GOESRRCOLUMN3HEADER? 5 Command sent to the XL™.
Log Column 3 Header = WaterLvl rs Response from the XL™.
Command: LOGCOLUMNnHEADER=XXXXXXXX
Description: Set the n th column header.
Parameters: ‘n’ ranges from 1-25. The new column header can be up to 8 characters of ASCII
text. If the value is shorter that 8 characters, it will be padded on the right side with
spaces so the length equals 8.
Response: None.
Example: -> LOGCOLUMN4HEADER=Temp (C)
5 Command sent to the XL™.
rs Response from the XL™.
H-5223
Remote Operation (Command Mode) C-31