Xylem A-100NE CHEMICAL PUMPS - Manual (Page 19)

A-100NE
Page 19
RUN
PROGRAM
STAND-BY
PRIME
MINIMUM
MAXIMUM
4
08.0
MODE
SEC TOT-T
+
Press the MODE button to exit the on time
programming screen and enter the Hz
minimum programming screen. The
HZ
icon will blink. A blinking ARROW will
appear next to the word MINIMUM. The
current minimum Hz setting will be
displayed and the left most (selected) digit
will blink.
+
Pressing the DIGIT button will increase the selected digit.
+
Pressing the FIELD button will select a new the digit to the right.
+
Press the DIGIT button to increase the selected digit.
(selected) digit will blink. The decimal is fixed and cannot be moved.
+
Pressing the DIGIT button will increase the selected digit.
+
Pressing the FIELD button will select a new the digit to the right or the
time unit.
+
Press the DIGIT button to increase the selected digit or time unit.
+
Press the MODE button to exit the total time programming screen and
+
Press the MODE button to exit the Hz
minimum programming screen and enter
the total time programming screen. The
total time
TOT-T icon will blink. The
currently selected time unit icon will be
displayed. The current total time setting
will be displayed and the left most
enter the Hz maximum programming
screen. The
HZ icon will blink. A blinking
ARROW will appear next to the word
MAXIMUM. The current maximum Hz
setting will be displayed and the left most
(selected) digit will blink.
+
Pressing the DIGIT button will increase
the selected digit.
+
Pressing the FIELD button will select a new the digit to the right.
+
Press the DIGIT button to increase the selected digit.
+
At the same time, press the RUN/STANDBY button and the MODE
button. A blinking
ARROW will point to the word RUN indicating the run
mode has been activated.
NOTE: If while in the program mode no buttons are pressed within 60
seconds, the circuitry will automatically return to the run mode.
RUN
PROGRAM
STAND-BY
PRIME
MINIMUM
MAXIMUM
4
425
MODE
Hz
RUN
PROGRAM
STAND-BY
PRIME
MINIMUM
MAXIMUM
4
000
MODE
Hz