Extron Electronics CrossPoint 42 HVA - Manual (Page 36)

Specifications and Part Numbes, cont’d
CrossPoint 42 HVA Matrix Switcher • Specifications and Part Numbers A-2
Specifications and Part Numbers
Video
Routing .......................................... 4 x 2 matrix
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3dB), fully loaded
0 - 40 MHz ................. no more than +0.1dB to -0.1dB
0 - 230 MHz ............... no more than +2.0dB to -0.1dB
Crosstalk ....................................... -55dB @ 10 MHz, -45dB @ 30 MHz, -30dB @ 100 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type ................... 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
composite video
Connectors .................................... 4 x 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.5V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
Maximum DC offset .................... 1.2V
Video output
Number/signal type ................... 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
composite video
Connectors .................................... 2 x 5 BNC female
Minimum/maximum level ........ -0.5V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Triple-Action
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs
Input level ..................................... 0.5V to 5.0V p-p, 4.0V p-p normal
Output level .................................. AGC to TTL .............. 4V to 5V p-p
Input impedance .......................... 75 or 510 ohms, switchable
Output impedance ....................... 75 ohms
Polarity .......................................... Positive or negative (follows input)
Audio
Routing .......................................... 4 x 2 stereo matrix
Gain ............................................... Unbalanced -6dB, balanced 0dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.04% @ 1 kHz at rated maximum output drive
S/N ................................................ >90dB, balanced, at rated maximum output drive (21dBu)
Adjacent input crosstalk ............. <-90dB @ 1 kHz, fully loaded
Stereo channel separation ........... >90dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz