Extron Electronics RGB 560 AKM User Guide - Manual (Page 6)

Introduction, cont’d
RGB 500 AKM and RGB 560 AKM Introduction 1-2
Introduction
About the Interfaces
Extron’s RGB 500 AKM and RGB 560 AKM interfaces are universal, analog,
computer-video interfaces with 300 MHz (-3dB) video bandwidth. The interfaces
feature Extron’s ADSP™ (Advanced Digital Sync Processing™) to ensure stable
sync signal output, while allowing trouble-free centering control.
Up to three interfaces can be installed in an Ackermann floor tank.
Figure 1 — Interface components
Features
RGB 500 AKM and RGB 560 AKM features
Both interfaces provide the following features:
Digital sync processing — Using regular sync processing to allow centering
control (H-shift) can create problems with some digital display devices as a
result of the sync delay. Extron’s ADSP restores a stable sync signal, while
allowing centering control. The RGB 500 AKM and RGB 560 AKM
interfaces also provide another option, DDSP™ (Digital Display Sync
Processing™), to ensure proper displays without altering sync pulse
timing or width. It can be selected via a DIP switch.
Horizontal shift control — Adjust horizontal centering via a front panel knob.
RGBHV, RGBS, or RGsB outputs — Select the output format via DIP switches.
LO CA L O UT
ID P IN 1 1 ID P IN 4
H. S HIF T
RG B 558 A
KM w ith A DS P TM
MIN /M AX
RGB 560 AKM with ADSP TM
BUFFERED
LOCAL OUT MIN/MAX
H. SHIFT
AUDIO
ID PIN 4 ID PIN 11
INPUT
RGB 560 AKM
Ackermann Floor Tank