Extron Electronics TP T Series Transmitters User Guide - Manual (Page 26)

Installation and Operation, cont’d
TP T Series Transmitters • Installation and Operation 2-16
PRELIMINAR
Y
If the image is not displayed correctly
1 . For computer video, if the output image looks too green, ensure that the
receiver’s SOG switch is set to Off.
2 . For computer video, if the picture hangs off the edge of the screen, adjust the
transmitter’s H Shift control.
N DDSP disables the horizontal shift control.
3 . Place the receiver’s Manual/Auto switch to manual and adjust the level and
peaking controls for optimum quality.
4 . The transmission distance may be too far for remote power. Try connecting
the local 15 VDC power supply to the transmitter.
5 . For computer video from a laptop or for ungrounded AC distribution
systems, the transmitter may need to be grounded. See “ Grounding the
transmitter ”, earlier in this chapter.
If the receiver’s Manual/Auto LED flashes
1 . The transmission distance may be too far for remote power. Connect the local
15 VDC power supply to the transmitter.
2 . Check the RJ-45 connector for a loose connection.
If the actions described above do not solve the problem
Call the Extron S3 Sales and Technical support hotline. (See the rear cover of this
manual for the phone number for your region of the world.)