Specifications, Preliminar y, Specifications, part numbers, and accessories – Extron Electronics TP T Series Transmitters User Guide User Manual

Page 28

Advertising
background image

TP T Series Transmitters • Specifications, Part Numbers, and Accessories

A-2

Specifications, Part Numbers, and Accessories

PRELIMINAR

Y

Specifications

Video — video models

Number/signal type ..................... 1, 2, or 4 sets of proprietary analog signals
Connectors ..................................... 1, 2, or 4 female shielded RJ-45

Video input — video models

Number/signal type

TP T 15HD A ...................... 1 analog RGBHV, RGBS, RGsB, component video, S-video, or composite

video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;

or

3 NTSC/PAL composite video from a single source

TP T 15HD AV ................... 1 analog RGBHV, RGBS, RGsB, component video, S-video, or composite

video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;

or

3 NTSC/PAL/SECAM composite video from a single source and

1 NTSC/PAL/SECAM composite video

TP T BNC DA4 .................. 1 analog RGBHV, RGBS, RGsB, component video, S-video, or composite

video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;

or

3 NTSC/PAL/SECAM composite video from a single source

N

These products accept component video with bi-level sync only.

Connectors

TP T 15HD A ...................... (1) female 15-pin HD (Mac and Sun/SGI to VGA adapters are available.)
TP T 15HD AV ................... (1) female 15-pin HD (Mac and Sun/SGI to VGA adapters are available.)

1 female RCA

TP T BNC DA4 .................. 5 female BNC

Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video

0.7 Vp-p for RGB and for R-Y and B-Y of component video

0.3 Vp-p for C of S-video

Minimum/maximum levels ........ 0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 130 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 100 mV

Video output — refer to the TP Receivers Family User’s Manual

Audio — audio models

Number/signal type ..................... 1 or 2 sets of analog proprietary signals
Connectors ..................................... 1 or 2 female RJ-45
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N .................................................. >63 dB at maximum output (unweighted)
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >66.6 dB @ 1 kHz
CMRR .............................................. >33 dB @ 20 Hz to 20 kHz

Advertising