IPX DDK-1500D User Manual
Page 49
49
5.1.5 Change the Application Setting
Please follow the steps below to change the application setting through the network if necessary.
z
Change the Application Setting — FTP Application Setting (MJPEG mode only).
Please follow the steps below to change the FTP setting via the network if necessary to upload recording
data live.
1. Click
the
Application button on the home page to enter the “FTP Application Setting” page
(default).
2.
For the storage setting, type in the required number of images you wish to set in "Pre - Alarm
Memory Buffer" and "Alarm Memory Buffer respectively" in their corresponding blank spaces.
3.
Enter the "Upload Rate" you have chosen.
4.
Click "Submit" after each of the above entries for their settings.
5.
Click the “Home” button to return to the home page.
Description of function keys:
Pre – Alarm Memory Buffer: Fixes the desired number of images to prelude an alarm.
Alarm Memory Buffer: Determines the selected length of the image buffer after an alarm.
Upload Rates: Sets the upload speed rate.