IPX DDK-1500D - Manual (Page 62)

62
5.2.2 Install the IP surveillance in your PC
Install the IP surveillance from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
automatically. Follow the on-screen instructions to proceed with the rest of the installation
procedure as they appear.
NOTE: It will update the .NET Framework to version 2.0 automatically. Please click “Accept”
to continue.
3. After the installation is complete, pop up the START menu from your computer, and point
to Programs / NOBRAND01 / IP surveillance to open up the program selection page as
shown below. Click the IP surveillance tag to start the IP surveillance program.
Install the IP surveillance for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated directory.
2. Open the extracted folder. The folder contains 1 file.
3. Click on the icon to execute the installation and then follow the on-screen
instructions to proceed with the rest of the installation procedure.
4. After the installation is complete, click the START menu from your computer, and point to
Programs / IP surveillance to start the IP surveillance program.
NOTE: Please make sure the TCP/IP communication software has been properly set and
configured in your computer. To check your TCP/IP settings, please refer to section 4.5
(the TCP/IP configuration setting).