IPX DDK-1500D - Manual (Page 53)

53
z Change the Application Setting —Record Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1. Click the Enable Record button on the left side of the record to enter the “Record Application
Enable Setting” page.
Record setting page of MJPEG mode Record setting page of MPEG4 mode
2. Click “Enable Record – UPLOAD Via FTP” to checkmark the attached box and activate the function
(MJPEG mode only).
3. Click “Enable Record – Save Into SD card” to checkmark the attached box and activate the
function.
4. Click the Submit button to submit the new setting of the recording.
5. Click the Home button to return to the home page.
Description of function keys:
Enable Record – Upload Via FTP: Activates or deactivates the recording to the FTP server.
Enable Record – Save Into SD Card: Activates or deactivates the recording to the SD card.