IPX DDK-1700BC - Manual (Page 47)

47
2. To set the Time Configuration select a time zone from the drop-down menu. Select Enable Daylight
Saving Time if required. Then select
”Auto Daylight Saving” or “Set date and time manually”.
3. To set the Automatic Time Configuration select “Synchronize with NTP Server” and enter the address
of the NTP Server.
4. To set the Date and Time manually select “Set date and time manually” and then select “Copy Your
Computer ’s Time Settings” or manually set the date and time from the drop-down menus.
5. Click the Submit button to save the Date and Time settings.
Functions:
Time Zone: Select time zone from the drop-down menu.
Enable Daylight Saving: Select to enable daylight saving time.
Auto Daylight Saving: Select this option to configure Daylight Saving setting
automatically.
Set date and time manually: Select this option to configure Daylight Saving date and
time manually.
Offset: Sets the amount of time to be added or removed when
Daylight Saving is enabled.
Synchronize with NTP server: Enable this feature to obtain time configuration
automatically from the NTP server.
NTP Server: The Network Time Protocol (NTP) synchronizes the device
with an Internet time server. Choose one close to your
location.
Set the date and time manually: Allows for setting time and date manually.
Copy Your Computer’s Time Settings: Will synchronize time information from Computer.