IPX DDK-1700BC - Manual (Page 57)

57
for uploading. "Passive Mode": Set details for Network storage. Only one network storage
device is supported. "Network storage location" is the path to upload the media.
"Workgroup" is the workgroup for network storage.
4. Click on SD card to activate this function. The SD card is used for recording video data.
5.
Click “Submit” to save or click on “Don’t Submit” to go back to the Event main page.
Server settings:
(1) Click Add in the Sever area on the Event Settings page to open the Server setting page.
On this page, you can specify where a notification has been sent when a trigger is
activated. A total of 5 server settings can be configured.
NOTE: The maximum number of server settings is five. Network storage or SD
card can only be set for one.
(2) Enter the Server Name for the server setting.
(3) Select the Server Type. There are four choices of server types available: Email, FTP,
Network storage and SD card. Select the server types.

Email: Select to send media files via email when a trigger is activated.
(a) Sender email address: Enter the email address of the sender.
(b) Recipient email address: Enter the email address of the recipient.
(c) Server address: Enter the domain or IP address of the email server.
(d) User name: Enter the user name of the email account.
(e) Password: Enter the password of the email account.
(f) Port: The default email server port is 25. You can also manually set different
port.
(g) To verify if the email setting is correctly configured click the Test button. The
result will be shown above the setting page (TEST OK or TEST ERROR). If
successful, you will receive an email indicating the result.
(h) Click Submit to activate the setting.
