Eset, Utton – IPX DDK-1700BC User Manual
Page 7
7
The PCB board:
1
2
3
4
5
6
7
8
9 10
1.
Power Input: AC 24V input that connects to an external power supply.
2.
ETHERNET 10/100 Connector: Standard RJ-45 connector for 10/100 Mbps Ethernet
networks. PoE (Power over Ethernet) function:
Provides power to the device via the same
cable as used for the network connection.
3.
Plug Inlet: DC 12V inlet that connects to an external power supply.
4.
GPIO: 6-PIN connector including Digital output/input, DC output and GROUND for
connecting with external devices.
5.
VIDEO OUT Connector: Connector providing composite video output.
6.
AUDIO IN: Connector to receive audio input from external devices.
7.
USB port: Connects DDK-1700BC to USB port on a PC.AUDIO OUT: Provides audio to an
external device.
8.
SD/ SDHC CARD slot: Used for updating system software and archiving video.RESET:
Reset to factory default. (Refer to section 2.4 The Reset Button.)
1.2 The Reset Button
The Reset Button will bring the DDK-1700BC back to its factory default settings. Press the Reset
Button for about 10 seconds. A Blue screen will be displayed and a text that says
“RESETTING…”
will appear. The device will then auto reboot. All settings will then be back to default. The following
items will return back to default.
[SETUP]
Network Setup
a.
LAN Settings (You can manually reset this function.)
b.
PPPOE Settings (You can manually reset this function.)
Dynamic DNS