Physio-Control LUCAS 2 - Manual (Page 14)

LUCAS TM 2 Chest Compression System – Instructions for Use
100666-00 F Valid from CO J2547, © 2011 JOLIFE AB
14
4.3 Prepare the LUCAS™
Stabilization Strap
Before the first use of LUCAS, attach the
support leg straps, which is a part of the
Stabilization Strap, to the LUCAS support
legs.
1. Fold one support leg strap around each
LUCAS support leg.
2. Fasten the buckles on the inner side of
the support leg.
4.4 Prepare the Carrying Bag
1. Insert a fully charged LUCAS Battery in
the Battery slot in the hood of LUCAS.
2. Make sure that a Suction Cup is
mounted correctly.
3. Put the Upper Part in the Carrying Bag
with the hood towards the open end.
4. Put the external Power Supply (optional)
in one of the pockets between the
LUCAS support legs.
5. Put an extra (optional) charged LUCAS
Battery in the other pocket.
6. Put the cushion strap of the Stabilization
Strap between the support legs.
7. Extra Suction Cups can be put in the
side pockets close to the hood.
8. Position the Back Plate on top of the
bag.
9. Close the green inner lock.
10. Put the Instructions for Use (IFU) in the
transparent IFU pocket in the bag
11. Close the bag.
TM