Magimix GELATO CHEF 2200 - Manual (Page 9)

APPLIANCE CLEANING AND MAINTENANCE
Before starting to clean make sure that the machine is switched off and unplugged.
To release the paddle motor from the clear lid, proceed as follows:
• push the cover with your thumbs as shown in fig. 8 until the keyhole part of the clear lid
is over the hole in which the spindle fits.
• Remove the spindle from the motor.
Wash the paddle, the spindle, the clear lid and, if necessary, the removable bowl and wash
them in warm, soapy water.
Wash out the fixed bowl with a sponge and dry it with a cloth.
Use a damp cloth to clean the paddle motor.
NEVER IMMERSE THE MOTOR AND THE MAIN BODY OF THE ICE CREAM MAKER
IN WATER.
Important: when the removable bowl is used, it is essential to eliminate every trace of the
salt / water solution from the outside of the bowl. This will prevent corrosion.
SERVICING
Points to check before calling Service Number:
1. Has the machine been stored / delivered the wrong way up.
2. Has the machine been left to rest 12 hours after transit.
3. If the machine is not freezing, has the freezing switch inadvertently been turned on and
off in quick succession.
4. If the paddle motor is not working, check it has been fully locked into position and the
switch (E) is fully depressed.
5. If the paddle motor does not fit properly, ensure the removable bowl is fitted correctly
and not causing an obstruction.
6. If the machine body becomes hot, check if warm air is coming out of the vents. If not the
machine is faulty.
7. Providing the machine has been correctly operated, it should not take more than 40
minutes to make a batch of ice cream.
After checking these points please ring Magimix on 01483-427411 or if you have any queries
on the functioning of the machine.
If your machine is faulty it will be dealt with by our Service Department. Please retain your
packaging should it be necessary to return it for repair.
7