Andrew James AJ000014 Ice Cream Maker with Spare Bowl - Manual (Page 6)

6
4. Lower the assembled lid/ power unit/ paddle
into the bowl and turn it clockwise to lock it
into position.
5. You can now switch the ice cream maker on
using the On/Off knob switch.
The machine must be switched on before adding the Ice cream or sorbet recipe to
prevent the mix from immediately freezing on the inside of the inner bowl.
6. Use the chute and pour the ice cream or sorbet mix into the inner bowl.
7. Allow the mixture to churn until frozen or the desired consistency is
reached. This can take 15 to 30 minutes, but most recipes will be ready in
less time.
8. Switch off and remove the power unit/lid. The ice cream is ready to serve.