Andrew James AJ000079 90 Day Pet Feeder User Manual
Page 12
12
FAQ’S
1.
The clock can display in either 12 or 24-hour display format
The ( PM ) icon will show in the afternoon under the 12-hour display
mode.
2.
The feeding days can be changed at any time but the previous schedule
will be replaced and will start from the 1
st
new feeding day set.
3.
The feeding times and feeding-volume can be changed at any time and
the new settings will be for the rest of the feeding day/s schedule.
4.
Once the schedule has started, the DAYS displayed will be reduced by 1
every day at 0:00 (midnight) until the end is reached. It will then revert
back to the original number of set DAYS and the Feed Alarm will sound.
Just press the START key to start your original program/settings again.
5.
If the timer icon is OFF and all numbers are flashing then no feeding
schedule has been set.
6.
When the timer icon is ON and all numbers on the LCD display are not
flashing then the schedule has started.
7.
When the Clock icon is ON the current time is displayed.
8.
When the Red (LOW BATT) light FLASHES, the batteries are low and must
be replaced.
Change all the batteries as soon as possible. You will have to reprogram all
your settings again when the batteries are changed.
9.
When the LCD display shows ( Err ), the food delivery door is not closing
properly. You need to remove any food that jams the door.
1) Switch OFF the Auto Feeder, remove all food, turn your Auto Feeder
upside down.
2) Clean both doors hinges with a soft brush.
3) After cleaning switch ON the Auto Feeder and refill with food.
10.
Note: You will have to reprogram all your original settings before you
can use your feeder again.
11.
Always use the Quick Setup Guide for fast easy programming. If you want
more advanced features, use the this Instruction Manual.