Andrew James AJ000079 90 Day Pet Feeder User Manual
Page 8
8
To review the settings
1.
Press the TIMER key to cycle through and view the feeding times. Only the
feeding times per day that are set will be displayed. Digit-1 is the feeding
number each day, Digit 3 & 4 are the feeding times (in hours). Example: (1
07)=(1st feeding at 7am).
2.
Press the VOL key once to view the volume/portion-size and feeding day
(s) remaining.
3.
Press the DAY key to display feeding day(s) remaining.
4.
Press the CLOCK key once to display the current time, the CLOCK icon will
now turn on.
Control Panel
LCD Display
PM
TIMER
Digit-1 Digit-2 Digit-3 Digit-4
5.
If no key is pressed for more than 8 seconds, the display will switch back to
show the next feeding time
with the timer icon flashing.
Note:
Using the TIMER key to cycle through the feeding times will only display the
number of feedings you set. The sequence will repeat after the last one is
displayed.
Only the 1
st
feeding time will be displayed if you’ve set just 1 feeding.
A flashing timer-icon means the feeding-time has not been reached while a solid
timer icon means the feeding-time has already passed.
The volume and day display shares the same screen so Digit-1 & 2 are the feeding
day(s) remaining while Digit-4 is the Volume/Portion-size.