Andrew James AJ000079 90 Day Pet Feeder - Manual (Page 9)

9
Setting the Number of Days to Feed
1. Press the DAY key and the left side of the LCD shows the number of days
your Automatic Feeder will feed for until it stops. The default setting of
(0) means the feeder will feed continuously and never stop.
2. To change the number of days to feed, press the DAY key then press and
hold the SET key (for 2 seconds) until the days flash on the LCD.
3. Press the DAY key to change the number of days. Hold down the DAY key
to speed through the numbers.
4. If you set a number of days to feed (1 to 99 days) then at 6am after the
last day the feeder Alarm will start beeping.
5. To repeat the same schedule without any changes, just press the START
key.
6. To feed continuously, set the number of days to 0.
Note:

When the timer-icon and all the numbers on the LCD display are
continuously ON, the feeding schedule has started.

Once a feeding schedule has started, you can force it to end by pressing
the SET and START keys together.
Record Voice Message to be played at feeding times
Press and hold the REC key, the Red LED will turn on.
Speak your message. You have up to 6 seconds.
When finished, release the REC key.
Play back recorded Voice Message
Press the PLAY key.
Your recorded message will now play.
At each Feeding your recorded message will play and repeat 3 times.