AAEON EMB-KB1 - Manual (Page 27)

2-19 Chapter 2: Motherboard information
EMB-KB1 LVDS connector
LVDS1
PIN 1
Back Light Control for DC mode
GND
LVDS0_CLK+
GND
LVDS0_D0+
LVDS0_D1+
LVDS0_D2+
LVDS0_D3+
EDID_Clk
LVDS1_D0+
LVDS1_D1+
LVDS1_D2+
LVDS1_D3+
GND
LVDS1_CLK+
LVDS Panel Enable
LVDS VCC
LVDS0_CLK-
LVDS VCC
LVDS0_D0-
LVDS0_D1-
LVDS0_D2-
LVDS0_D3-
EDID_Data
LVDS1_D0-
LVDS1_D1-
LVDS1_D2-
LVDS1_D3-
LVDS VCC
LVDS1_CLK-
7. LVDS connector (30-pin LVDS1)
This connector is for an LCD monitor that supports Low-Voltage Differential
Signaling (LVDS) interface.
8. Backlight inverter power connector (5-pin INV1)
Connect the backlight inverter power cable to this connector.
Inverter VCC
Back Light Control
GND GND
Back Light Enable
PIN1
EMB-KB1 Inverter Connector
INV1