AAEON EMB-KB1 - Manual (Page 28)

EMB-KB1 2-20
10. USB 2.0 connector (10-1 pin USB67 and USB45)
This connector is for USB 2.0 ports. Connect the USB module cable to
connector USB1112. This USB connector complies with USB 2.0 specification
that supports up to 480 Mbps connection speed.
EMB-KB1 USB2.0 connectors
IMBM-H61A Front USB 2.0 Header connectors
+5V USB4- USB4+ GND (NC)
+5V
USB5- USB5+
GND
USB45
PIN 1
+5V USB6- USB6+ GND (NC)
+5V
USB7- USB7+
GND
USB67
PIN 1
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
The USB module cable is purchased separately.
EMB-KB1 MINICARD connectors
MINI_CARD1
MINI_CARD2
9. Minicard connector
Use this connector to connect a Minicard reader.
NOTE: The Mini-card module is purchased separately.