AAEON EMB-KB1 - Manual (Page 41)

3-11 Chapter 3: BIOS setup
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then
press <Enter>.
3. From the Create New Password box, key in a new password, then press
<Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
3.7 Save & Exit menu
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved. When you select this option, a
confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Reset
This option allows you to exit the Setup program without saving your changes.
When you select this option or if you press <Esc>, a confirmation window appears.
Select Yes to discard changes and exit.
Restore Defaults
This option allows you to restore/load default values for all setup options.
Save as User Defaults
This item saves current configuration as User Default.
Restore User Defaults
This option restores User Defaults to all setup options.
Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.