American Expedition Vehicles JK Hemi Builder Kit - Installation Guide for 07-11 JK Wrangler - Manual (Page 30)

27
PART VI: PLUMBING
A. AEV HEMI Fuel Line
1. Remove the locking clip out of the plastic fuel line at the tank as shown (fig. 1.)
2. Install the stud provided into the 5-45 transmission and reuse the steel fuel line bracket from the
V6 engine (fig. 2.)
3. Install the AEV Fuel Line; be sure to lubricate all tubes or hoses prior to installation in order to avoid
damaging seals (fig. 3.)
fig. 1 fig. 2
fig. 3