Atec Agilent-8722ES - Manual

5
Agilent 8722ES with 2.4 mm test ports
Standard, Options 400, 012 1 , 089, or any combina-
tion of these options.
Calibration kit: 85056A, 2.4-mm with sliding loads
Cables: 85133F 2.4-mm flexible cable set
IF bandwidth: 10 Hz
Averaging: None (8 during isolation calibration)
System dynamic range
0.05 to 0.84 GHz 67 dB
0.84 to 8 GHz 93 dB
8 to 20 GHz 91 dB
20 to 40 GHz 80 dB 2
Magnitude Phase
Magnitude Phase
Corrected measurement port specifications
Frequency range (GHz)
0.05 to 2 2 to 8 8 to 20 20 to 40
Directivity 42 dB 42 dB 42 dB 38 dB
Source match 42 dB 38 dB 38 dB 33 dB
Load match 42 dB 42 dB 42 dB 38 dB
Reflection tracking ±(0.005 dB + 0.03 dB/°C) ±(0.010 dB + 0.03 dB/°C) ±(0.010 dB + 0.04 dB/°C) ±(0.021 dB + 0.06 dB/°C)
Transmission tracking ±(0.020 dB + 0.03 dB/°C) ±(0.038 dB + 0.03 dB/°C) ±(0.048 dB + 0.04 dB/°C) ±(0.110 dB + 0.06 dB/°C)
Maximum output power
0.05 to 20 GHz: –5 dBm
20 to 40 GHz: –10 dBm
1. Internal test set not bypassed.
2. 3 dB less with Option 012.
Transmission measurements
Measurement uncertainty
Reflection measurements