Atec Fluke-OF-500 - Manual (Page 127)

Specifications
117
Power
Battery type Lithium ion battery pack, 7.2 V
Battery life 8 hr Auto OTDR operation with OFTM-5612 module, dual wavelength, 1 test run and saved every 5
minutes, no FiberInspector probe attached, 150 m of fiber
Charge time 6 hours maximum from total discharge
Traceable Calibration Period
To ensure maximum accuracy of test results, have the
tester calibrated at a Fluke Networks authorized service
center every 12 months.
Certifications and Compliance
P
Conforms to relevant European Union directives.
)
Listed by the Canadian Standards Association.
Memory for Test Results
Test results can be stored on a removable MultiMediaCard
(MMC), Secure Digital (SD) memory card, or in internal
memory. Memory card capacity depends on the type of
records saved. Typical capacity for a 16 MB card is over
400 OTDR tests.
The amount of internal memory available for test results
depends on the space used by the tester’s software and
custom test limits.
To see the memory space available for different record
types on an installed memory card or in internal memory,
press F; then select Memory Status.