Atec Fluke-OF-500 - Manual (Page 31)

Basic Features
21
A Model number of the installed module.
B The current date and time.
C Owner’s logo. See the OptiFiber Technical Reference
Handbook (on the Product Manuals CD) or the LinkWare
online help for information on changing the logo.
D Battery status icon. For more information about the
battery, press
F ; then select Battery Status.
E Press E to see the hardware and software versions and
calibration dates for the tester and the installed module.
F Press D VFL to activate the visual fault locator.
G If the last test run was not saved, you can press
C Unsaved Result to see the test’s results.
H Press A Change Test to switch test modes. See K.
I Action prompts. For most screens, this area prompts
you on what keys to press.
J Important test and job settings. To change these
settings, use
KLMN to highlight a setting; then
press t . Selecting TEST LIMIT or FIBER TYPE lets
you change the item. Selecting the limit’s or type’s
name lets you see that item’s settings. You may also
access the tester’s settings by pressing
S .
K The test mode, which determines what type of test
will run when you press
T . The available modes
depend on which module is installed. To change the
test mode, press
A Change Test.
L The name of the current screen.
Figure 5. Home Screen for OTDR with Loss/Length Option (cont.)