Kaiser S45I84XL - Manual (Page 38)

38
EN
RINSE AID DISPENSER
The rinse aid is released during the final rinse to
prevent water from forming droplets on your dishes
which can leave spots and streaks.
It also improves drying by allowing water to "sheet"
off the dishes.
The dishwasher is designed to use liquid rinse
aids.
The rinse aid dispenser is located inside the door
next to the detergent dispenser.
To fill the dispenser:
• Open the cap 1. Turn the cap to the ”open"
(left) arrow and lift tout,
• Pour the rinse aid into the dispenser until
the level indicator
2 turns completely black,
• Replace the cap by inserting it aligned with
"open" arrow and turning it to the closed
(right) arrow.
Fill the dispenser with about 100 ml of rinse aid.
Wipe away any spills with a damp cloth.
Don't forget to replace the cap before you close the
dishwasher door.
Adjusting Rinse Aid Dispenser
A measured amount of rinse aid is released from
the dispenser during the final rinse.
Too much rinse aid can result in lather of foaming
and cause cloudiness or steaks on your dishes.
If the water in your area is very soft, you may not
need rinse aid. If you do, you can dilute the rinse
aid with an equal amount of water.
1
2