Kaiser S45I84XL - Manual (Page 74)

74
EN
Andere Funktionen
For all models
If the machine has a lack of salt or rinse aid then
display shows the corresponding symbol or
messages: «Add salt» or «Add rinse». If the
quantity of salt or rinse aid is enough, display
doesn’t show any messages.
All programs can run with
3 in 1 option. If the 3
in 1 option is selected, the machine will run
according to selected wash program.
Please pay an attention, that during the short
programs, the tablet is not completely dissolved
and remains partially at the bottom of tank of
dishwasher. It is recommended, for programs
Cristal, Rinse and Rapid to use special washing-
up liquids for short programs.
If the same parameters (
3 in 1 option, time
sequence, language) has been selected and ran
for 3 times, then these parameters will be
considered automatically as the default
parameters from the fourth time on.
When a language has been selected, it will be
saved by dishwasher as the main language until
another language will be selected in Language
menu.
Malfunctions and error codes
Water fill malfunction (water does not reach the
required level after the 4 minutes filling). Error
code: ERROR 1 with the selected language
displayed.
Overflow malfunction (too much inlet water). Error
code: ERROR 4.
If the touch control panel is covered with water or
with other objects, which have influence with the
sensor buttons, the display will show ERROR 9
with corresponding language.