Kaiser KCT6406 User Manual
Page 26
Timer function
Using the timer as a minute counter
This function too simplifies operation by not requiring
human supervision during the cooking cycle. Once the
set time on the timer has elapsed, the cooking zone will
be switched off automatically.
If no zone has been programmed, the timer simply
operates as a minute counter (see the section Using
the timer as a minute counter ).
Choose the cooking zone you need, for example
by touching the corresponding key.
The indication of the heating level of the corresponding
heating zone
blinks.
Turn on the timer by touching the key .
On the timer display
blinks statement
.
Select the cooking time between 0 to 99 minutes
by touching the timer buttons
or
or
.
Touch and hold down the keys
or
or
to
scroll the time setting.
The decimal point
of the relative cooking zone
illuminates. It informs that timer has been activated.
The timer function will start up automatically in a few
seconds. Note that the timer function applies to the
selected cooking zone only.
count
down the cooking zone
Touch the buttons
and
and
at the same
time.
When the timer function is not programmed, the timer
display can be used simply to minute counter. After
elapsing time it emits a sound signal, which can be
turned off by touching any key.
When the displayed time elapses, the cooking zone will
be not turned off.
«
»
•
•
•
(
)
(
)
If during the timer
was switched off, the timer turns
off automatically.
•
(
)
Using the timer function
10
Rapid shutdown of the cooking area and relative
timer
1
2
3
4
5
6 +
–
5
6 +
–
7
5
6 +
–
26
EN
4
3
1
2
6
5
—
7.
H —
IO
7