Avision FB6280E (BT-0911S) - Manual (Page 10)

2.1 Unlocking your scanner
To protect the scanning unit from damage during
transportation, a lock switch is designed at the back of the
scanner to keep the scanning unit from moving. To unlock the
scanner, move the lock switch up as shown in Fig. 2-1.
Unlocked
Locked
Figure 2-1 Unlocking the Scanner
Scanning unit at
this position
before locking the
scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the
scanner before transporting the scanner, be sure to do the
follows:
1. Turn on the scanner. The scanning unit should move to
the front of the scanner.
2. Press the lock switch down to the “Lock position”.
3. The scanner is now ready to transport.
2-2