Avision FB6280E (BT-0911S) - Manual (Page 100)

9.4 Caring the Auto Document Feeder
9.4.1 Cleaning the Feeding Rollers
From time to time the pad assembly and feeding rollers may
become contaminated with ink, toner particles or paper dust.
In this case the scanner may not feed documents smoothly.
If this occurs please follow the cleaning procedures to return
your machine to its original state.
The Cleaning Procedures
1) Dip a soft clean cloth with isopropyl alcohol (95%).
2) Press the ADF Release button on the upper-left. Open the
front door slightly to the left. Wipe the feeding rollers.
Rotate the roller forward with your finger and repeat the
cleaning steps above until the entire roller is cleaned.
3) Wipe the rubber part of the ADF pad. Be careful not to
damage the pick springs.
4) Close the scanner front door. Your scanner is now ready
for use.
ADF Release
button
9-6