Avision FB6280E (BT-0911S) - Manual (Page 89)

User’s Manual
6-5
6.3 Scanning From One Touch of the Buttons
1. Place your original face down on the document glass and
make sure the top of your original near the document
alignment mark.
2. Check the number on the LED screen to ensure if you are
selecting the proper scan settings and destination
application. (For example, if you want to scan with button
#4, which open Microsoft Paint and display the scanned
image in the main window of Microsoft Paint, the LED
screen should show 4).
3. Press the Scan button on scanner.
4. After the scanning is finished, the Microsoft Paint software
will be launched and the scanned image appears in the
main window of Microsoft Paint as below.
Note:
1. For details information on how to use the Button Manager,
please refer to the user’s manual in the supplied CD.
2. You may also using Button Manager on your desktop by
starting Button Manager from All Programs or double
clicking the Avision Scanner Utility from the Control Panel.