2 connecting to power, 1 turning on the power, Connecting to power -3 – Avision FB6280E (BT-0911S) User Manual
Page 11
Advertising
User’s Manual
2.2 Connecting to Power
Plug the small end of the power adaptor into the power jack of
your scanner. Insert the other end to an appropriate power
outlet.
2.2.1 Turning on the Power
After the power cable has been connected, press the power
switch button on the panel to turn on the scanner. The LED
indicator will be lit up. To turn off the scanner, press the
power switch button again. The LED indicator will be shut
off.
2-3
Advertising