Avision AM7100N (MT-0904B) - Manual (Page 123)

Replacing the Snap-in Pad Module
After scanning many and many pages through the ADF, the pad may be worn out
and you may experience problems with document feeding. In this case, it is highly
recommended to replace the pad module with a new one. For ordering the pad
module, please consult your nearest dealer and follow the procedure below to
replace it.
Disassembling Procedure
1. Gently open the ADF front cover.
2. Remove the ADF snap-in pad module by pressing the lock upward.
ADF Pad
Assembling Procedure
1. Gently open the ADF front cover to the left.
2. Remove the ADF pad module from the box.
3. Place it into the holes until it snaps into place.
117