Avision AM7100N (MT-0904B) - Manual (Page 85)

Setting the timeout period to delete an ID job
To set the timeout period to delete an ID job,
1. Press the Menu button.
2. Press the Right-arrow or the Left-arrow button until “ 6. Net Scan Set ”
appears on the display.
3. Press Set.
4. Select 64. Time Out Set by using the Right-arrow or the Left-arrow button
and then press Set.
5. Select your desired time out value by using the Right-arrow or the Left-arrow
button, and then press Set. After the timeout period, your ID job will be
automatically deleted.
79