Avision AM7100N (MT-0904B) - Manual (Page 144)

6. Click Network Setting to prompt the following Network Setting page.
After updating settings on this page, click Submit button.
Click Reset button if you want to recover the previous settings.
Note:
1. After the network settings are specified, the product must be rebooted to apply
all updated network settings.
2. If you want to use the network function and let your PC successfully connect to
the product, the network cable must be plugged into the product before the
product is powered on.
3. If you plug the network cable into the product after powering on the product,
you must reboot the product to enable the network function.
4. After the network settings are updated via the Menu button on the control
panel or the embedded web pages, you must unplug the network cable for
about 5 seconds, plug in again, and then reboot the product to apply the
updated the network settings.
138