B&K Precision 2532B - Manual - Manual (Page 65)

65
Single: The oscilloscope acquire a waveform when the
trigger condition is satisfied and then stops.
5. Set up Trigger coupling
• Press the “Set up” button to enter the “Trigger Setup
Menu”.
• Press the “Coupling” option button to select “DC”,
“AC”, “HF Reject” or “LF Reject”.
Pulse Trigger
Use Pulse Width triggering to trigger on aberrant pulses.
Table 15 - Pulse trigger Function Menu 1
Option Setting Explain
Type Pulse Select the pulse to trigger
the pulse match the
trigger condition.
Source CH1
CH2
EXT
EXT/5 Select input signal
source.