B&K Precision 2532B - Manual - Manual (Page 97)

97
Set Skin
Press the “skin” option button or turn the “Universal”
knob to select “Classical”, “Modern”, “Traditional”, or
“Succinct”.
X-Y Format
Use the XY format to analyze phase differences, such as those represented
by Lissajous patterns. The format plots the voltage on channel 1 against the
voltage on channel 2, where channel 1 is the horizontal axis and channel 2
is the vertical axis. The oscilloscope uses the untriggered Sample
acquisition mode and displays data as dots.
Operation steps:
●
Channel 1 “Volt/div” and vertical “POSITION” set up
the horizontal scale and position.
●
Channel 2 “Volt/div” and vertical “POSITION” set up
Note：The oscilloscope can capture a waveform in normal YT mode
at any sampling rate. You can view the same waveform in XY mode.
To do so, stop the acquisition and change the display format to XY.