Bray 98 Series - Manual (Page 5)

All information herein is proprietary and confidential and may not be copied or reproduced without the expressed written consent of
BRAY INTERNATIONAL, Inc. The technical data herein is for general information only. Product suitability should be based solely upon customer’s
detailed knowledge and experience with their application.
S98 O & M : 5
Series 98 Operation & Maintenance
1.0 Safety Information - Definition of Terms
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
NOTICE
used without the safety alert symbol indicates a potential situation which, if not avoided, may result in
an undesirable result or state, including property damage.
1.1 Hazard-free use
This device left the factory in proper condition to be safely
installed and operated in a hazard-free manner. The notes and
warnings in this document must be observed by the user if this
safe condition is to be maintained and hazard-free operation of
the device assured.
s
rough handling, impact, or improper storage. Do not use
abrasive compounds to clean, or scrape its surfaces with any
objects.
s
required for the safe operation of this product.
s
proper safeguards to prevent injury to personnel, or damage
to equipment, should failure of system components occur.
s
version of the product described. It cannot take into account
every potential occurrence in installation, operation,
maintenance and use.
s
detail, please request the required information from the Bray
Distributor or Representative responsible for your area.
1.2 Qualified Personnel
with the installation, commissioning and operation of the product and
s
pressure equipment and systems in accordance with
established safety practices.
s
tag and lock electrical circuits and equipment in accordance
with established safety practices.
s
equipment (PPE) in accordance with established safety
practices.
s
s
explosive (hazardous) location – is trained in the operation,
commissioning, and maintenance of equipment in hazardous
locations.