Bray 70 Series SERVO PRO DeviceNET - Manual (Page 19)

S70 DeviceNet Servo Installation & Maintenance Manual
2000 BRAY CONTROLS Page 18 of 24
Figure 7: Display of S70 Parameters supported by the EDS file
EDS parameters which are settable can be modified and saved to the S70 Servo. As an
example, to change the valve position, the “Valve Position” parameter is highlighted, and then
“Modify Parameter” is selected. Figure 9 is an example of an EDS parameter modification
display. Once the parameter has been modified, it is saved to the S70 Servo and takes effect
immediately.
Depending upon the EDS enabled application that is used, features such as monitoring are
available which provide the user with a continuously updated display the selected parameter
group.