MoTeC CDL3 - Manual (Page 8)

8 Introduction
Compatibility
• MoTeC ECUs: M4, M48, M8, M84, M400, M600, M800 and M880
• MoTeC Accessories: E888, SLM, PLM, LTC, BR2, PDM, GPS, PDM, etc.
• Many non-MoTeC ECUs and other devices
Required Accessories
Refer to Connecting the Dash Logger to a PC
• Standard Ethernet cable
Optional Accessories
• Any one of the following:
o
#18023 Track Display Kit
o
#18024 Track Logging Kit
o
#62203 Loom, CDL3 Terminated
o
#61196 CDL3 Input Loom
o
#61197 Loom, CDL3 to OBD-II
o
#61198 Loom, CDL3 to MoTeC CAN ECU
o
#61199 Loom, CDL3 to RS232 ECU
o
#61224 Cable network RJ45
System Overview
The Dash Logger offers extensive possibilities to integrate with ECUs,
peripheral devices and accessories to form a complete solution that powers,
controls, logs, monitors and communicates virtually any automotive
parameter.
Typical devices used with the Dash Logger
ECUs
The CDL3 Dash Logger can be connected to all MoTeC engine management
systems and some other manufacturers' ECUs either via CAN, RS232 or
OBD-II. This avoids duplication of sensors and allows the Dash Logger to
display and log many ECU parameters.
The typical update rate is about 20 times per second for RS232 and 50 times
per second for CAN, but is less from OBD-II.