Asus T3-M2NC51PV - Manual (Page 35)

2-19 ASUS T3-M2NC51PV
2.10 Reinstalling the power supply unit
Reinstall the power supply unit (PSU) after installing the system
components and reconnecting the cables.
To reinstall the PSU:
1. Lift the chassis to a 90 o angle.
2. Connect the 4-pin 12
V power plug to the
ATX12V connector on the
motherboard.
3. Connect the 24-pin
ATX power plug to the
ATXPWR connector on the
motherboard.
4. Position the PSU over the
chassis.
5. Align the PSU side hook with
the metal slot located on the
side of the optical drive bay.
6. Slide the PSU toward the
direction of the rear panel until it fits in place.
7. Secure the PSU with the screw you removed earlier.
Make sure the PSU cables do not interfere with the CPU and/or chassis
fans.
Power supply unit plugs 3
8
9B
9A
2