Asus T3-M2NC51PV - Manual (Page 74)

5-20 Chapter 5: BIOS setup
ECC Configuration
ECC Configuration
DRAM ECC Enable [Enabled]
ECC MCE Enable [Disabled]
4-Bit ECC Mode [Disabled]
DRAM SCRUB REDIRECT [Disabled]
DRAM ECC allows
hardware to report
and correct memory
errors automatically
maintaining system
integrity.
DRAM ECC Enable [Enabled]
Allows you to enable or disable the DRAM ECC.
Configuration options: [Disabled] [Enabled]
ECC MCE Enable [Disabled]
Enables or disables the ECC MCE Enable.
Configuration options: [Disabled] [Enabled]
4-Bit ECC Mode [Disabled]
Enables or disables the ECC Chip Kill function.
Configuration options: [Disabled] [Enabled]
DRAM SCRUB REDIRECT [Disabled]
Enables or disables the DRAM SCRUB REDIRECT.
Configuration options: [Disabled] [Enabled]
Power Down Control [Auto]
Allows the DIMMs to enter power down mode by deasserting the clock
enable signal when DIMMs are not in use. Configuration options: [Auto]
[Disabled]