Asus T3-M2NC51PV - Manual (Page 73)

5-19 ASUS T3-M2NC51PV
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3.0] [4.0] [5.0][6.0]
TRAS [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK]... [18 CLK]
TRP [Auto]
Configuration options: [Auto] [2 CLK] [3 CLK]... [6 CLK]
TRCD [Auto]
Configuration options: [Auto] [2 CLK] [3 CLK]... [6 CLK]
TRRD [Auto]
Configuration options: [Auto] [2T] [3T] [4T] [5T]
TRC [Auto]
Configuration options: [Auto] [11T] [12T] [13T]... [25T]
Bank Interleaving [Auto]
Sets the bank interleaving feature.
Configuration options: [Auto] [Disabled]
The following item appears when the MCT Time Mode item is set to
[Manual].
MCT Timing Mode [Auto]
Sets the MCT Timing mode.
Configuration options: [Auto] [Manual]
The Bank Interleaving item appears only when you use a memmory that
supports this function.
MemClk Tristate C3/ATLVID [Disabled]
Enables or disables the MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Enabled] [Disabled]
Memory Hole Remapping [Disabled]
Enables or disables the memory remapping around the memory hole.
Configuration options: [Enabled] [Disabled]