Asus T3-M2NC51PV - Manual (Page 72)

5-18 Chapter 5: BIOS setup
NorthBridge Configuration
Memory Configuration
Memclock Mode
[Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Disabled]
Memory Configuration
NorthBridge Chipset Configuration
Memory Configuration
ECC Configuration
Power Down Control [Auto]
Memory CLK : 200 MHz
CAS Latency(Tcl) : 2.5
RAS/CAS Delay(Trcd) : 3 CLK
Min Active RAS(Tras) : 8 CLK
Row Precharge Time(Trp) : 3 CLK
RAS/RAS Delay(Trrd) : 2 CLK
Row Cycle (Trc) : 11 CLK
Row Refresh Cycle(Trfc) : 24 CLK
Read Write Delay(Trwt) : 3 CLK
Read Preamble : 5.0 ns
Asynchronous Latency : 6 ns
Memclock Mode [Auto]
Sets the memory clock mode. Configuration options: [Auto] [Limit]
[Manual]
The following item appears when the Memclock Mode item is set to
[Limit] or [Manual].
Memclock Value [200MHz]
Configuration options: [200MHz] [266MHz] [333MHz] [400MHz]