Adjustments – CHIEF PWR User Manual
Page 9
Advertising
Installation Instructions
PWR
9
Figure 8
(E) x 4
x 4
From Display
(A)
ADJUSTMENTS
Pitch Tension Adjustment
To adjust display pitch tension:
1.
With display installed, tighten or loosen two screws, one on
each side, using a 5/32” hex wrench. (See Figure 9)
2.
Check for desired tension.
3.
Repeat Steps 1 and 2 until desired tension is obtained.
Figure 9
X2
2
1
Advertising