CHIEF XVAUB - Manual (Page 10)

XVAU Installation Instructions
10
2. Wrap cables around cable hooks (C) as desired. (See
Figure 15)
Figure 15
Adjustments
Height Adjustment
1. Turn height adjustment knob clockwise to raise display.
(See Figure 16)
2. Turn height adjustment knob counterclockwise to lower
display. (See Figure 16)
WARNING: Do not attempt to raise or lower the adjustment
carriage beyond its upper or lower limit. (See Figure 16) and
(See Figure 17) for high and low points.
NOTE: Lower tabs will rest on rubber bushings when the
lowest point is reached. (See Figure 17) inset
A 1/2” socket wrench may also be used to adjust height by
turning bolt just above height adjustment knob.
Figure 16
Figure 17
Pitch Adjustment
1. Loosen pitch adjustment screws to allow pitch to be
adjusted. (See Figure 18)
2. Adjust pitch as desired. (See Figure 18)
3. Tighten pitch adjustment screws to lock pitch position. (See
Figure 18)
Figure 18
(C) x 4
2
1
high point
2
height adjustment knob
1
2
low point
front view
rubber bushing
pitch adjustment
screws
1 3
(side view)
2